Xen, LVM and Snapshots Revision as of Monday, 21 December 2015 at 02:30 UTC

References

• A most excellent explanation of using snapshots as
  backups
• Live Xen Snapshotting strategy
• xenBackup - A script to
  automate backups using tar, rsync or rdiff-backup

[http://searchservervirtualization.techtarget.com/tip/Creating-snapshots-in-Xen-with-Linux-commands?ShortReg=1&mboxConv=searchServerVirtualization_RegActivate_Submit& Archived Article]

A virtual machine snapshot is a great feature, freezing the current
state of a virtual machine. Unfortunately, open source Xen doesn’t offer
support for snapshots – but Linux does. Since open source Xen always
uses Linux as its privileged domain, you can use Linux commands to
create snapshots.

Byte-by-byte snapshot
One way of making snapshots in Xen is by using Linux dd after saving
the current state of a virtual machine. This would involve the following
steps:

1. Use the xm save command to disable the current state of a virtual
   machine and write it to a disk file. This would write the machine
   state only to a file, not the current state that is used in the Xen
   disk files or partitions. To do this for a domain with the name
   linux01, use xm save linux01 linux01.sav. Take note that this
   command stops the virtual machine.
2. Now dump the current state of the disk image files to a backup file
   using dd. The following example would do this for LVM logical
   volumes used by Xen:
   dd if=/dev/xenvols/linux01_root of=/data/xen_linux01_root.img
3. Restart the virtual machine using the xm restore command.
4. asdjalksjdasdasldjalsdjals asdlajdlas alksjdalksd

The major disadvantage of this solution is time. The dd command makes
a byte-by-byte copy of the virtual machine disk file and that can take
an incredibly long time. Therefore, this option may not be very
practical.

The LVM method
In Linux, the Logical Volume Manager (LVM) can also be used for
creating a snapshot, one that takes significantly less time than the
previous disk file method. This method implies that your virtual machine
uses an LVM logical volume as its storage back-end, as opposed to using
a virtual disk file. For this logical volume, you next need to create a
snapshot. This snapshot is a kind of backup that contains metadata and
blocks that have changed from the moment that you took the snapshot
only. The trick is that when you use dd to make a copy of the snapshot
via the metadata, you’ll always make a snapshot of the original blocks
on the original volume without the need to de-activate the original
volume as well. By working this way, you can reduce the time it takes to
create a snapshot of the virtual machine drastically. The procedure is
as follows:

1. Use the xm save command to save the current state of the virtual
   machine and write it to a disk file:
   xm save linux01 linux01.sav
2. Assuming that you already have an LVM logical volume that is used as
   the storage back-end for your virtual machine, use the following
   command to make a snapshot of this volume. A good guideline is to
   use 10% of the allocated disk space in the original logical volume
   as the size to use for the snapshot volume:
   lvcreate -s -L 1G -n linux01-snap /dev/xenvols/linux01
3. Since you’ve now saved the state of your virtual machine in the LVM
   snapshot, you can restart the virtual machine, reducing the down
   time of the virtual machine dramatically as compared to the method
   sketched above:
   xm restore linux01-sav
4. Use dd to create the snapshot of the virtual machine and write it
   to an image file. This will take longer since by using the snapshot
   you will copy all the disk blocks that are allocated by the virtual
   machine:
   dd if=/dev/xenvols/linux01-snap of=/data/xen01.img
5. Don’t forget to remove the snapshot in the last step of
   this procedure. This is important because a snapshot that stays
   around will eventually fill up completely and when that happens the
   snapshot will be disabled. The problem with this is that it will
   prevent you from remounting the original volume as well, so don’t
   forget to apply this last step:
   lvremove /dev/xenvols/linux01-snap

While no Linux distribution offers a solution in the open source Xen
stack to create a virtual machine snapshot as of yet, you’ve read how
you can do it anyway by using standard Linux tools such as LVM and dd.